How To Remove Samsonite Cell Phone Car Mount

Introduction

Samsonite cell phone car mounts have become a popular accessory for drivers looking for a convenient way to safely secure their smartphones while on the road. These mounts provide a hands-free solution, allowing drivers to easily access navigation, music, and other apps without taking their eyes off the road.

However, there may come a time when you need to remove your Samsonite cell phone car mount. Whether you’re changing vehicles, upgrading your mount, or simply no longer need it, removing the mount correctly is essential to avoid any damage to your car or the mount itself.

In this article, we will guide you through the step-by-step process of removing your Samsonite cell phone car mount. By following these instructions, you’ll be able to safely remove the mount without leaving any residue or causing any harm to your car or the mount.

So let’s dive in and discover how to remove your Samsonite cell phone car mount in the easiest and most efficient way possible.

Step 1: Gather necessary materials

Before you begin the process of removing your Samsonite cell phone car mount, it’s important to gather all the necessary materials. Having these items ready will help streamline the process and ensure a smooth removal.

Here’s what you’ll need:

• A microfiber cloth or soft cleaning cloth
• Isopropyl alcohol or adhesive remover (optional)
• A plastic card or credit card
• A hairdryer or heat gun (optional)

The microfiber cloth or soft cleaning cloth will be used to clean any residue or dirt from the car and the mount after removal. Isopropyl alcohol or adhesive remover can be used to remove any stubborn adhesive remaining on the surfaces.

The plastic card or credit card will come in handy to help pry the mount off the surface without causing any damage. Finally, a hairdryer or heat gun can be used to apply gentle heat to soften the adhesive, making it easier to remove.

Once you have all these materials ready, you’re prepared to move on to the next steps of removing your Samsonite cell phone car mount.

Step 2: Disconnect the mount from the car

Now that you have gathered all the necessary materials, it’s time to disconnect the Samsonite cell phone car mount from your car. Follow these steps to ensure a smooth disconnection:

1. Start by locating the mount on your car’s dashboard, windshield, or other desired location. Samsonite mounts are typically attached using a strong adhesive.
2. Using your fingers or a plastic card, gently pry one corner of the mount away from the surface. Take care not to use excessive force, as this could damage your car or the mount itself.
3. Slowly work your way around the edges of the mount, gradually pulling it away from the surface. Use the plastic card to help release any stubborn areas where the adhesive may be strongly attached.
4. If you encounter difficulty in removing the mount, you can use a hairdryer or heat gun to apply gentle heat to the adhesive. This will soften it, making it easier to pry the mount off.
5. Continue working the mount off the surface until it is completely detached. Be cautious not to pull too hard, as this could cause the mount to snap off suddenly.
6. Once the mount is disconnected, set it aside in a safe place for future use or proper disposal.

By following these steps, you should be able to disconnect your Samsonite cell phone car mount from your car without any issues. Now, let’s move on to the next step: releasing the phone from the mount.

Step 3: Release the phone from the mount

After disconnecting the Samsonite cell phone car mount from your car, the next step is to release your phone from the mount securely. Follow these steps to ensure a safe and hassle-free removal:

1. Gently grasp your phone and locate the release mechanism on the mount. This is usually a button or lever that you can press or slide to release the grip on your phone.
2. Press or slide the release mechanism to unlock the mount’s grip on your phone. Take care not to apply too much force, as you don’t want to damage your phone.
3. Once the grip is released, carefully lift your phone out of the mount. Be gentle and ensure that you have a firm hold on your phone to prevent it from accidentally falling.
4. If your mount has any additional features, such as adjustable arms or tilting mechanisms, make sure to adjust them back to their original positions before storing the mount.

It’s important to note that every Samsonite cell phone car mount may have a slightly different release mechanism. Refer to the specific instructions provided by Samsonite for your particular model if you encounter any difficulties releasing your phone.

Now that your phone is safely released from the mount, let’s move on to the next step: removing any adhesive residue from the car and the mount.

Step 4: Remove the adhesive from the car and mount

After releasing your phone from the Samsonite cell phone car mount, it’s important to remove any adhesive residue left behind on both the car and the mount. This will ensure a clean and smooth surface for future use or for attaching a new mount. Follow these steps to effectively remove the adhesive:

1. Start by inspecting the car and the mount for any visible adhesive residue. Use your fingers or a soft cloth to gently peel off any loose adhesive.
2. If there are stubborn adhesive spots remaining, you can use an adhesive remover or isopropyl alcohol. Apply a small amount of the remover or alcohol to a cloth and gently rub the adhesive until it starts to dissolve.
3. Continue rubbing the adhesive in a circular motion until it lifts off completely. Take care not to scrub too vigorously, as this could damage the surface of your car or the mount.
4. For particularly stubborn adhesive, you can try using a plastic card or credit card to scrape it off. Hold the card at a slight angle and apply gentle pressure to remove the residue.

Ensure that you thoroughly clean both the car and the mount, removing all traces of adhesive. This will not only create a clean appearance but also allow for proper adhesion in the future, should you choose to use a new mount.

Once the adhesive is successfully removed, proceed to the next step: cleaning the car and mount surfaces.

Step 5: Clean the car and mount surfaces

After removing the adhesive residue from the car and the mount, it’s crucial to clean both surfaces properly. This step ensures that there is no dirt, debris, or leftover residue that could hinder proper adhesion in the future. Follow these steps to effectively clean the car and mount surfaces:

1. Start by using a microfiber cloth or a soft cleaning cloth to wipe down the car’s surface where the mount was previously attached. This will help remove any dust, dirt, or fingerprints.
2. If necessary, dampen the cloth with a small amount of water or a mild soap solution to help remove stubborn stains. Wring out the cloth to ensure it is only slightly damp, as excessive moisture could damage the car’s interior.
3. Gently wipe down the car’s surface, paying close attention to the area where the mount was attached. Be thorough in your cleaning to ensure a clean surface for future mounting.
4. Next, turn your attention to the Samsonite cell phone car mount itself. Use the same microfiber cloth or soft cleaning cloth to wipe down the mount, removing any dirt, dust, or residue.
5. Make sure to clean all areas of the mount, including any adjustable arms or tilting mechanisms. This will ensure that the mount is in optimal condition for future use.

By properly cleaning both the car and the mount surfaces, you are setting the stage for a successful attachment of a new mount or ensuring that the mount is clean and ready for storage, should you choose not to use it again.

Now, let’s move on to the final step: storing the mount for future use.

Step 6: Store the mount for future use

If you plan to use the Samsonite cell phone car mount again in the future or want to keep it as a backup, it’s important to store it properly. This will help protect the mount from damage and ensure its longevity. Follow these steps to store the mount effectively:

1. Start by finding a safe and dry storage location for the mount. Avoid areas that are prone to extreme temperature fluctuations or high humidity, as these conditions can damage the mount.
2. Ensure that the mount is clean and free from any dirt or residue before storing it. You can lightly wipe it down with a microfiber cloth or soft cleaning cloth to remove any remaining dust or fingerprints.
3. If the mount has any adjustable arms or tilting mechanisms, make sure to adjust them back to their original positions. This will prevent any unnecessary strain on the mount and ensure it remains in good working condition.
4. Consider using a protective case or pouch to store the mount. This will provide an additional layer of protection against dust and potential scratches or damage.
5. Place the mount securely in the storage case or pouch, ensuring that it is not bent or twisted. If the mount has any fragile parts, handle them with care and avoid applying excessive force.
6. Store the mount in the designated location, away from any potential hazards or objects that could accidentally cause it to be damaged. This will ensure that it remains in optimal condition until you’re ready to use it again.

By following these steps, you can safely store your Samsonite cell phone car mount for future use or as a backup option. This will help prolong its lifespan and ensure that it’s ready for use whenever you need it.

Congratulations! You have successfully removed your Samsonite cell phone car mount, removed any adhesive residue, cleaned the car and mount surfaces, and stored the mount for future use. Now you’re ready to explore other mounting options or keep your mount safely stored until you need it again.

We hope this guide has been helpful in assisting you with removing and storing your Samsonite cell phone car mount. Safe travels!

Conclusion

Removing a Samsonite cell phone car mount may seem like a daunting task, but with the right guidance and a few simple steps, it can be done efficiently and without causing any damage. By following the steps outlined in this guide, you can safely disconnect the mount from your car, release your phone from the grip, remove any adhesive residue, clean the surfaces, and store the mount for future use.

Remember to gather all the necessary materials before starting the removal process, such as a microfiber cloth, adhesive remover, plastic card, and a hairdryer. Take your time and be gentle when prying the mount off the surface of your car to avoid any scratches or damages. Additionally, be cautious when releasing your phone from the mount to prevent any accidental drops.

Properly cleaning the car and mount surfaces is crucial to ensure optimal adhesion in the future or to keep the mount in good condition for storage. Use a soft cloth and, if needed, a mild soap solution to remove any dirt or residue. Store the mount in a safe and dry location, preferably in a protective case or pouch, to prevent any damage while not in use.

We hope this guide has provided you with the necessary knowledge and confidence to successfully remove and store your Samsonite cell phone car mount. Whether you’re changing vehicles, upgrading mounts, or simply no longer need it, following these steps will ensure a smooth and hassle-free process.

Safe travels and enjoy the convenience of a clutter-free car interior!